Truetone NW1-B - 1 SPOT Series - 9v pedal power supply

Product Information

x CL6 – (5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity) Green – for Line 6 DL4/M9/etc. and some Eventide pedals. Compatible with Boss PSA, Boss ACA, DOD PS-200R, Morley 9V, Danelectro DA-1, Dunlop ECB-03, Ibanez AC109, Zoom AD-0006 adapters Note: Outputs 1-11 can each handle more than the stated mA number. However, it is important to never exceed the max. current rating of all outputs simultaneously. x CYR – (5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity) Red – reverse polarity converter

Line 6 modeling pedals (DL-4/MM-4) may be powered by outputs 8-11, but will also require the CL6 converter. You may optionally use output 12, as the power input of these pedals can use 9Vac or 9Vdc.

Oh no! Why did I get blocked?

The Truetone 1 SPOT is guaranteed to work with any equipment that uses one of the following adapters (over 90% of the effects pedals on the market!): Boss PSA, Boss ACA, Danelectro DA-1, DOD PS-200R, Dunlop ECB-03, Ibanez AC-109, Korg A30950, Morley 9V, Zoom AD-0006. With new converter plugs, the 1 SPOT will work with virtually ANY 9V pedal! ...even Line 6 modeling pedals. Will even convert international voltage (100V-240V) automatically; no transformer needed! 3 meter (10') cable is almost twice as long as other adapter cables. True to the spirit of the original 1 Spot power supplies, the new 1 Spot Pro range uses exactly the same switching power supply technology. Radial Tonebone 15Vdc pedals can be powered by an 18Vdc output, using the Reverse Polarity Converter (CYR) included with the 1 SPOT Pro. Input Power: The 1 SPOT Pro CS6 can be used anywhere in the world without the use of a step-up or step-down transformer. Like theoriginal 1 SPOT, it transforms wall voltage from 100-240Vac, and converts it into the stated voltages on the bottom of the unit The 1 SPOT is the original 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.

The Truetone 1 SPOT is a 9V PSU that only takes up 1 Spot on an outlet strip or wall outlet.The Truetone 1 SPOT solves an annoying problem that people have complained about for years. Only takes up ONE position on your outlet strip or wall outlet. Handles from one to over twenty guitar pedals (1700mA max!) New heavy duty output cable. Now available from Merchant City Music, online and in our Glasgow store, the Truetone 1 Spot pedal AC adaptor is the solution to your niggling pedal powering problems. We ship fast to the UK and Europe. Truetone 1 Spot Power SupplyMany germanium based fuzzes and Octavia-style pedals will require the use of the CYR adaptor to reverse the polarity to center pin positive.

Input Power: The 1 SPOT Pro CS7 can be used anywhere in the world without the use of a step-up or step-down transformer. It transforms wall voltage from 100-240Vac, and converts it into the stated voltages on the front panel of the unit This switching technology is able to handle much more current than the older, transformer-based power supplies. This means you don't have to worry if your pedal's current draw slightly exceeds the stated amount on your output - so long as the total across the board doesn't exceed 1600mA. The 1 SPOT Pro CS6 includes a generous assortment of cables and converter plugs. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end. Outputs:8 x 100mA outputs, 4 high-current 300mA outputs, 2 switchable 9-volt/12-volt outputs, 1 switchable 9-volt/18-volt output A "Switching" power supply is able to handle much more current than the older, transformer-based units. Therefore you needn't worry if your pedal's current draw slightly exceeds the stated amount on your output - so long as the total across the board doesn't exceed 1900mA. What's in the Box?x CL6 (5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity) Green for Line 6 DL4/M9/etc. and some Eventide pedals.