About this deal
The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.
The connector's width is around a half centimeter in width and came with 28 AWG wires connected to it (if that helps at all).Even if you don't manage to get the leads through the holes, you could bend the outer ones at right angles and merely solder them to the tops of the pads (less mechanical resilience being the trade-off. The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors. This SM series wire to wire white Connector is made of tin plated phosphor bronze contact and are individually surrounded by housing walls having secured locking mechanism, m. It features 145mm colour coded power leads terminated with a JST connector at the end and M3 mounting holes in the centre so it can be attached to the back of a micro:bit case. It is fitted with 145mm colour coded power leads and a JST connector at the end and features 2 x M3 mounting holes in the centre so it can be attached to the back of a BBC micro:.
This is a handy cable for connecting a six-pin JST GHR-06V type locking connector to breadboard-friendly male pins. If your charger has only the JST-XH balance socket or does not require connection to the main charge sockets, then select 'no plugs' below and cut the leads off. At Railwayscenics we do everything we can to make sure that the information included on our product pages is always as accurate as possible.This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors.
The 2 pin connector is used on 1S LiPo where the discharge current would exceed the safe limit for a 'UM' connector.
The 3 pin plugs are increasingly used on small 2S LiPo batteries for dual use as power and balance connector. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. The 3 pin is used on 2S LiPo to eliminate the need for separate discharge and charge/balance connectors.