Fireangel CO-9B Carbon Monoxide Alarm, Kitemark Approved, 7 Year Life, White, 1 pack

Product Information

Looking for a CO-9D alarm replacement? FireAngel’s new FA3322X4 alarm will be replacing any end-of-life CO-9D alarms. Carbon Monoxide (CO) alarms: A Carbon Monoxide detector is the only way to be alerted to a carbon monoxide leak; it can’t be smelt, tasted or seen so it’s impossible for human senses to detect. Known as the ‘Silent Killer’, carbon monoxide (CO) occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. However, carbon monoxide can also pass through walls, so you would also be at risk if a neighbouring property had a leak. FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel-burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home.

Known as the ‘ Silent Killer’, CO occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. However, carbon monoxide can also pass through walls, so you would also be at risk if a neighbouring property had a leak.Landlords must also repair or replace alarms when notified of a fault, but regular alarm testing will remain the responsibility of the resident. The smoke and CO alarms must comply with BS EN 14604 (Smoke) and EN 50291‑1 (CO) and carry a British or European approval mark, such as a Kitemark. attaching the base plate. After 1 minute, press the test button to hear the alarm sound. Please note, the alarm will not sound before the 1 minute activation period is complete. Experience both audible and visual safety warnings with the digital screen, which will change colour to indicate different incident types for clear safety advice.

FireAngel’s new range of carbon monoxide alarms use intelligent sensing technology for a rapid reaction to rising levels of CO. Find out more about the FA3313X4 CO Alarm. FA6813-EU: Carbon Monoxide Alarm with replaceable batteries With a multi-functional LCD digital display and array of exclusive features such as Alarm Memory, Ventilate Instruction, Quiet Self Test and Environmental Sensing, the FA3322X4 offers the highest level of CO detection for your home. In living spaces: they should be positioned close to where the occupant's head is likely to be most of the time – e.g., on your bedside table.However, if your CO alarm is beeping, flashing red or not responding during a test, follow our troubleshooting guide to decipher the cause. This guide applies to FireAngel FA3313 and FA3820 alarms. Why is my FireAngel CO alarm going off?

With intelligent CO sensing technology and built-in features including sleep easy function, silence and alarm memory, this alarm will keep residents protected from carbon monoxide. With our sleep easy function, you can silence low battery chirps for 8 hours, up to 10 times. This feature not only allows you to enjoy a silent night’s sleep, but gives you vital time to take action and replace your batteries. Find out more about the FA3322-EUX10 Digital CO Alarm. FA3820-EUX10: 10 Year Carbon Monoxide Alarm, sealed battery Ideal for home and travel use, the FireAngel CO-9B carbon monoxide alarm is suitable for wall mounting or free standing as a portable device. The FireAngel CO-9B has a 7 year lifespan and is supplied as standard with 2 x AA alkaline batteries to power the alarm. Its LED status indicators show when the alarm is correctly powered as well as when it has entered alarm mode. Also note that carbon monoxide has been proven to spread into neighbouring properties through open windows and, in semi-detached or terrace houses, through loft spaces. If your property has an attached garage with a connecting door through to the house, it is recommended to fit a CO alarm inside the house leading from that doorway.Simple testing, quieter volume. Residents have convenience of the quiet self-test function for regular, discreet testing at a reduced noise level. Discover more. How many CO alarms are needed for a property? Find out more about the Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022 to ensure you are compliant. Achieve compliance with Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022

CO detectors should be installed near potential sources of carbon monoxide, essentially any fuel-burning appliances such as boilers, cookers and ovens, fireplaces (both open and enclosed burners), and portable generators. As you are likely to be most affected by CO in areas of your home that you spend the most time in it is advisable to install alarms in those areas as well, such as the living room and bedrooms. It is also worth noting that while one detector is better than no detectors at all, larger homes may require several detectors to cover the property fully. We derive satisfaction from creating fire safety products of extraordinary calibre, guaranteeing the continuation of our esteemed tradition of customer service excellence for the years ahead. Night sensing lowers the brightness of alarm’s heartbeat sensor and automatically activates ‘sleep easy’ mode, allowing residents to silence low battery chirps for 8 hours, up to 10 times. Stands & Storage – If you are looking for a designated place to store and protect your fire extinguishers look no further than our wide range of cabinets and stands FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel‑burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home. Activating your new FireAngel CO alarmAn audible Carbon Monoxide detector is the only way to be alerted to a carbon monoxide leak; it can’t be smelt, tasted or seen so it’s impossible for human senses to detect. The alarm’s high sensitivity mode will be enabled if the alarm predicts CO levels will increase to or above 180ppm for fast reaction to rising CO levels. With low level CO monitoring, a pre-alarm warning to open windows helps reduce the risk of CO poisoning and prevents build-up of dangerous CO levels. If a room is not ventilated and ppm levels continue to increase, the alarm will activate. Perfect as a free-standing unit or can be easily mounted to a wall or ceiling. It is also completely portable so can keep you safe no matter where you stay. Combined smoke & CO alarms or mains-powered CO alarms are typically installed on the ceiling and should be at least 30cm away from any wall, light fitting, or other obstruction.