276°
Posted 20 hours ago

Kreg KHI Concealed Hinge Jig, Blue

£80.995£161.99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Calling the Everbilt template a cabinet hinge jig is a bit of a stretch, but as a low-cost way to mark out cabinet hinge positions, it works fine. It also includes the necessary Forstner drill bit, though not the 1/16-inch bit for hinge retaining screws. Even skilled carpenters usually turn to a door hinge jig to ensure the fast, accurate positioning of door hardware. This tool helps obtain the precise measurements required for the task of installing doors. Most are simple enough to be used by even relatively inexperienced DIYers, and most are very affordable—especially when compared to the cost of ruining a door. The jig can flex if too much pressure is applied when routing, so care is needed. Unfortunately, the included router bit is not very good and soon loses sharpness. Those with numerous doors to hang may wish to invest in a better cutter. A router bit is required with full-size door hinge jigs, and one is often included. Shank size will be either ¼ inch or ½ inch. Neither is better than the other, but the size will determine the kind of router used. Some ½-inch routers include a ¼-inch collet as an option, whereas ¼-inch routers cannot use ½-inch bits.

There are a number of cabinet hinge jigs available that mimic the high-quality Kreg model described above. The BI-DTool has a few features that set it apart from many low-cost rivals. It is made from engineered plastic—a synthetic resin noted for increased durability. Cams provide the usual offsets at 3mm, 4mm, 5mm, and 6mm, and there’s a depth stop so the jig can be used for framed and frameless doors. There are removable corner inserts, so the Ryobi jig can be used for round- or square-cornered hinges (though the latter will still need finishing manually with a chisel). A high-quality router bit is included, as is a self-centering drill bit for making the actual hinge holes. Both bits are conveniently stored onboard the jig body. TheKreg® Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called “Euro hinges”) using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly.The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. TheKreg® Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig. The Everbilt jig is basically an L-shaped piece of transparent plastic that is held against the door edge. Holes allow pencil marks to be made for the hinge and retaining screws. The jig is then put aside and the relevant holes drilled. Any adjustment for offset will need to be done manually, which could lead to errors creeping in. Durability is assured by the cast-aluminum construction. For transportation, the jig is dismantled into two pieces, and it comes with a carrying case. A guide bush for the router cutter is included, though the cutter itself is not—rather disappointing given the Trend door hinge jig’s high price.

The Milescraft jig will fit 1⅜- and 1¾-inch doors as well as hinges from 2½ to 4½ inches, in ½-inch increments. With the main frame and templates, there are nine pieces in the kit. While this can seem confusing at first, each template is marked with the appropriate size or function. Kreg, one of the world’s leading jig makers, does not disappoint with this high-quality precision cabinet door hinge jig. It is made from tough glass-filled nylon and designed to cut holes for standard 35mm cabinet hinges (often called Euro hinges).This guide takes a close look at both types of door hinge jigs: those for full-size doors and those for cabinet doors. The two are actually quite different, so we’ll explain their technical aspects before offering suggestions for what we believe are the best door hinge jigs currently available. How the hinge jig is set up will depend on the type of jig. Some door jigs clamp to the side of the door, while others use locating pins and screws. Cabinet jigs usually need to be held in place using ordinary woodworking clamps, which will not be included. To ensure accuracy, it is important to follow the instructions that come with the jig. Q. How many hinges should a heavy door have?

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment