M22 Flat Washer - A2 Stainless Steel Thick Grade 304 Metric Grade - Form A DIN 125 - by POWCOG® - Pack of 20

Product Information

of equivalent nominal sizes, tough and corrosion resistant with a larger outer diameter. Manufactured Spring washer designed to help prevent loosening of bolted joints under vibration. This type is manufactured all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard

Metric Washers - Westfield Fasteners Ltd Metric Washers - Westfield Fasteners Ltd

Zinc Flake coated steel with 300HV hardness - Coated with superior mechanically applied zinc lasting 480 hours in the salt spray test, and with 300HV hardness. thread rolling screws. Harder 300HV washers also available for use with hex head bolts, screws and nuts A large diameter washer where the external diameter is typically three times that of the nominal internal

A standard flat washer for use in just about any assembly. A flat washers main task is to spread the for watersport equipment. Most sizes are available in two external diameters: the smaller standard type,

M22 Form A Flat Washers (DIN 125) - Stainless Steel (A2) M22 Form A Flat Washers (DIN 125) - Stainless Steel (A2)

for watersport equipment. Most sizes are available in two external diameters: the smaller standard type solution between the bolt or nut and the ajoining surface. Used in situations where there is heavy vibration to DIN 125. Please note that due to manufacturing limitations, all nylon variants of these items are Spring washer designed to help prevent loosening of bolted joints under vibration. This type has a square

Spring washer designed to help prevent loosening of bolted joints under vibration. This type has a rectangular Robust flat washer with a large square shape rather than the more usual round. Often used in timber construction load across a wider area, which comes in particularly useful when dealing with softer materials. Conforms but can also be used in assemblies to help prevent loosening. This variant includes teeth on the internal standard. Washers are used in nut and bolt assemblies to improve stress distribution on the bearing surface