V23074-A1001-A402 12V 4PIN PA66-GF25

Product Information

Melamine cyanurate-microencapsulated red phosphorus flame retardant unreinforced and glass fibers reinforced polyamide 66. Polym Degrad Stab. 2006;91(12):3103–9. 10.1016/j.polymdegradstab.2006.07.026 Search in Google Scholar

Annealing effect on semi-crystalline materials in creep behavior. J Therm Anal Calorim. 2002;69(1):37–52. 10.1023/A:1019925420733 Search in Google Scholar where S L is the shrinkage ratio of the injection molded products, L m is the mold cavity size (the real size after considering the shrinkage volume compensation of 0.5%), and L p is the size of the injection molded products.Flame retardant and dielectric properties of glass fibre reinforced nylon-66 filled with red phosphorous. Polym Degrad Stab. 2001;74(2):239–45. 10.1016/S0141-3910(01)00109-4 Search in Google Scholar HSBC, one of the largest banking and financial services institutions in the world, serves millions of customers through its four Global Businesses. HSBC has around 6,600 offices in 80 countries and territories across Africa, Asia, Europe, North America and South America, and around 60 million customers.

Influence of water on the short and long term mechanical behaviour of polyamide 6(polyamide) fibres and yarns. Multiscale Multidiscip Modeling, Exp Des. 2018;1(4):317–27. 10.1007/s41939-018-0036-6 Search in Google Scholar Surface fractography of the plate treated by the three routes: (a) and (d) route I (b), (e) route II, and (c) and (f) route III, in which (a)–(c) were obtained with a magnification of 500, and (d)–(f) were obtained with a magnification of 1,000 times.Data availability statement: The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request. cycles, in every cycle: −40 to 130°C, 10°C/h, the highest and lowest temperatures were maintained for 4 h, room temperature was maintained for 2 h. From the aforementioned comparisons, it can be concluded that the dimensional accuracies of the undried parts treated by route II are the highest for the peripheral dimensions and the diameter of the central hole. Nevertheless, its corresponding dried part can also basically meet the accuracy requirements. But in the usage of the plate, moisture should be prohibited to ensure its insulating and antibreakdown properties; hence, re-drying after the boiling water bath is recommended. 4.2 Mechanical property improvements of the plate treated by the three routes PA6 can absorb up to 7% (by weight) water under high humidity or submerged in water. This can result in dimensional changes up to 2% and a corresponding reduction of physical properties. Proper design techniques can frequently compensate for this factor.

Effect of flame retardant on properties of glass fibers reinforced polyamide 66. Eng Plast Application. 2002;10:9–11. Search in Google Scholar We have several search tools, listed above, that give you more efficient methods to reach the information that you need. The central hole diameter of the plate by the three routes: (a) DDT, undried parts, (b) DDT, dried parts, (c) DDL, undried parts, and (d) DDL, dried parts. 4.1.2 Periphery dimensional accuracies The transverse and longitudinal peripheral dimensions of the plate treated by the three routes: (a) I, (b) II, and (c) III.

Zytel® Technical Data Sheets

Annealing effect on crystalline structure and mechanical properties in long glass fibers reinforced polyamide 66. J Appl Polym Sci. 2017;134(13):1–10. 10.1002/app.44832 Search in Google Scholar In this article, three different treatment routes were applied and analyzed after injection molding to study the roles of boiling water bath and re-drying in improving the dimensional accuracies and mechanical properties of a plate that was made of PA66-GF25 FR (RP) by performing size measurements, mechanical property tests, and micro-morphology comparisons. Some conclusions are presented here. Courier offering global express distribution, logistics and international mail service of parcels and freight.